Description |
John Deere 4044M NOTE: This Tractor is just outside Sealy off of FM3013, this is where you will pick it up. Tractor has not been started since late November 2023, will need a battery/jump. The Bucket is at Manuel's Lawnmower Shop and Sells as lot # 266a. Loader is a John Deere D170. bought at Shoppas. Root Grapple is included and box blade.
Production 2014 – Present
Factory Augusta, Georgia, USA
Power
Engine (Gross) 42.5 hp
Gear PTO 34.6 hp
Hydro PTO 33.6 hp
Mechanical
Chassis 4×4 MFWD 4WD
Final Drives Planetary
Differential Lock Mechanical rear
Steering Power
Brakes Hydraulic wet disc
Cab Two-post folding ROPS
Engine Make Yanmar
Model 4TNV88C-MJT
Cylinders 4
Displacement 133.6 cu in
Advertised Engine Power 43.1hp
Rated Engine Speed 2600 rpm
Fuel Tank Capacity 13 gal
Aspiration Naturally aspirated
Power Take-Off
PTO Horsepower 34.5 hp
PTO Speeds 540 rpm
PTO Operational Type Independent
Transmission
Basic Transmission 12F/12R PowrReverser, Hydraulic shuttle shift
Optional Transmission eHydro, Hydrostatic, 3-range
Wheels and Tires
Drive 4WD
Front Tire Size 8.00×16, 6PR R1
Rear Tire Size 13.6×28, 4PR R1
Hydraulics and Hitch
Hydraulic System Type Open center
Main Hydraulic Pump Type Dual gear
Implement Pump Flow 10.2 gpm
Number of Standard Remote Valves 3
3-Point Hitch Category Category 1
Standard Lift Capacity 2500 lbs @ 24 inches behind pin
Dimensions and Weights
Height to Top of ROPS Raised 100.2 in
Overall Width 68.3 in
Weight, MFD/4WD w/ROPS 3770 lbs
Loader Info:
Height (to pin): 112 inches
Clearance, dumped bucket: 90 inches
Dump reach: 28 inches
Dump angle: 42°
Clearance, level bucket: 104 inches
Reach at ground: 66 inches
Breakout force (at pin): 3853 lbs
Breakout force (at 500mm): 2902 lbs
Breakout force (bucket): 3487 lbs
Lift to full height (at pin): 2391 lbs
Lift to full height (at 500mm): 1760 lbs
Lift to 1.5m (at pin): 2875 lbs
Lift to 1.5m (at 500mm): 2295 lbs
|